Free shipping for motorsports and aftermarket parts, sent directly from manufacturers to you.*

User
0

DEI 2" x 15' Tan Exhaust Wrap (DEI-010106)

Quick Overview

Exhaust wrap, tan color, 2" wide, 15 ft. long.
OUR PRICE

$16.81

$13.44

$50 vendor minimum

OR

Sold by: Design Engineering Inc.

Design Engineering, Inc.™ is one of the foremost suppliers of thermal tuning product featuring products for racers, street performance enthusiasts, and hobbyists alike. In addition to supplying the performance aftermarket with thermal tuning products, Design Engineering serves the needs of the powersports, marine, industrial and commercial industry markets the world over.

Phone: 1-800-264-9472    Email:
Product Description
Specifications
Vehicle Fitment

Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow.

Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation.

Features:
- Reduce under hood temperatures a realistic 50%
- Decreases exhaust density & increases exhaust flow
- Improves horsepower
- Withstands 1200°F direct/2000°F radiant
- Only exhaust wrap with installation guide lines
- Added durability and heat retention

NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap.
  • Manufacturer Design Engineering Inc.
  • Level X SKU DEI-010106
  • Manufacturer SKU 010106
  • UPC 00607078101068
  • Weight (lbs) 0.6000
  • Manufacturer Warranty 1 year
  • Country of Manufacture United States
  • Width 2 in.
  • Length 15 ft.
  • Direct Heat Rating 1200 F
  • Intermittent Heat 2000 F
  • Color Tan
No fitment data available. Please refer to the product description for details.
Questions & Answers About Exhaust Wrap

How much exhaust wrap do I need?

This varies a lot depending on your application. Use our handy calculator to figure it out!


How much exhaust header wrap do I need for a V-8?

A typical wrap of V-8 exhaust headers requires either 2x 50' or a single 100' roll.


How much exhaust wrap do I need for long tube headers?

Lots! Based on our experience, you need about 60' of 1" wrap per side. Alternatively, some folks have used two rolls of 35' or 33' of 2" wrap instead. Don't take our word for it though. Either buy extra or just use our calculator.


How much exhaust wrap do I need for a motorcycle?

It's best to use the calculator to get a more detailed estimate, but based on our experience, it's best to get a 50" roll. Don't forget to buy locking ties as well if your buying separately or just get an exhaust wrap kit instead.


Can I use hose clamps on my exhaust wrap instead of locking ties?

This is not recommended. While it may seem like a great idea, hose clamps have a tendency to loosen up over time and may also cut into your exhaust wrap, thus damaging it.


My locking ties appear a little loose around the wrapped exhaust pipe. Is that an issue?

No problem. This can happen and they will work just fine.


What's the benefit of titanium wrap over regular wrap?

The major difference is that it does not need to be wetted to install. It is much more flexible than standard exhaust wrap and thus easier to install.


How do I decide to use 1" or 2" wrap?

For tighter bends, it's recommended to use 1" wrap to get around them smoothly vs. 2" wrap.


Do I need to cure my pipes in an oven after wrapping them?

No, simply start the engine. No matter which exhaust wrap you choose, it will smoke when you start the engine while the wrap burnishes. Titanium wrap smokes very little compared to the fiberglass based wraps. Either way, you will want to be in a well ventilated area while this occurs.

 

We also maintain a guide with further Q&A around exhaust header wraps.